10003 General file transfer error.. \n\n Error Number:%d\n Related Component: %s\n RelatedFile: %s
10004 A supported version of Netscape Navigator (r) or Microsoft (r) Internet Explorer was not found. You will not be able to view video clips in a web browser. The plug-in may be installed separately after you have installed a supported browser.
10005 This product requires a resolution of 800 by 600 pixels and a color depth of at least 16-bit color. Your system does not support these settings.
10006 Set Up Audio & Video
10007 A previous version of Intel(R) Create & Share(TM) Camera Pack was found on your computer. You must uninstall the previous product before installing the new version.
10008 A supported version of Netscape Navigator (r) or Microsoft (r) Internet Explorer was not found. You will not be able to view video clips in a web browser. The plug-in may be installed separately after you have installed a supported browser.
10009 Setup has determined that not all of the required components were being loaded. Setup has attempted to correct this error. If Video Phone does not function correctly, please call the support number indicated in the documentation.
10010 Your Video Phone requires this information to make Internet Video calls. Do you want to continue and enter this information in the options of your Video Phone later?
10011 Setup requires a different version of Windows*. Check to make sure that you are running Setup on the Windows* platform for which it is intended.\n\nError 102.
10012 Main Gallery
10013 Clip Art
10014 %d MB of space is required on the %s drive. An additional %d MB are needed. Please free up some space (try emptying your Recycle Bin or removing other files).
10015 Unsupported platform: your operating system will not support the Intel(R) PC Camera (USB Version).
10016 Setup did not find the Intel(R) PC Camera (USB Version), please make sure that the camera is installed correctly. Refer to the Troubleshooting section of the user's manual. If you are using a non-Intel USB Camera, this warning may be disregarded.
10017 USB hardware was detected, but a compatible USB hub could not be found. You may continue with the Intel(R) Create & Share(TM) Camera Pack Setup, but your Intel(R) PC Camera (USB version) may not function correctly. If you encounter problems after installation, please contact your computer's manufacturer. \n\nDo you wish to continue?
10018 Setup must now restart your system.
10019 USB port not found. Your system either does not have a USB port or USB is not enabled in the BIOS. If the port is disabled, use your system's Setup program to enable it. Refer to the user's manual for information on enabling USB.
10020 Projects
10021 File not found: %s
10022 Unable to upgrade your Video Phone version 2.x (failed to find upgrade executable)
10023 Setup has determined that your current display settings do not meet the requirements of the Intel(R) Create & Share(TM) Camera Pack. Would you like Setup to change these settings for you?
10024 Intel(R) Create & Share(TM) Camera Pack
10025 Intel(R)
10026 Internet Test Call
10027 Try a Video Phone Call, 1-888-406-6748
10028 Try a Video Phone Call, 1-800-804-6333
10029 Setup has detected a version of Intel(R) Create & Share(TM) Camera Pack on your system. You already have Intel(R) Video Phone software. Setup will quit.
10030 Setup has detected a version of Intel(R) Create & Share(TM) Camera Pack on your system. You already have Intel(R) Video Phone software. Setup will quit.
10031 Setup has detected Send to a friend Intel(R) Video Phone software on your system. You will need to first uninstall it before running Setup again.
10032 Unsupported platform: your InTouch Module driver will conflict with the Intel(R) PC Camera (USB Version) driver.
10033 Are you sure you want to completely remove the Send to a friend Intel(R) Video Phone software and all of its components?
10034 You will need to change your system settings to a resolution of at least 800 by 600 pixels and at least 16 bit color before running the Intel(R) Create & Share(TM) Camera Pack.
10035 Unable to upgrade your Video Phone verison 2.x (failed running upgrade executable)
10036 Some portions of the Send to a friend Intel(R) Video Phone software require the product to be installed to a fixed drive. Please choose a new drive for the installation.
10037 Compaq VideoPhone is on your system. Remove it before installing the new Video Phone. To remove the existing phone: go to the Control Panel and select %s from the Add/Remove Programs. Then run setup again.
10038 Setup did not find a previous installation of Intel(R) Create & Share(TM) Camera Pack. To validate this upgrade, please enter the serial number from the original Create & Share CD that you received when you bought your camera.
10039 The serial number you provided is from the Software Companion (Upgrade) CD. Please provide the serial number from the original Create & Share CD that you received when you bought your camera.
10040 Before setup can continue, your previous product needs to be uninstalled. You will have the opportunity to re-install MetaCreations Kai's Power GOO SE and PictureWorks PhotoEnhancer from the Start Menu afterwards.\n\n Proceed with the uninstall?\n
10041 Setup has detected that your system was not restarted after uninstalling previous product version.\n Please reboot your system so setup can continue.
10042 Please enter the serial number for the original product in the space provided. This number is located on the back of the Intel(R) Create & Share(TM) Camera Pack CD-ROM jacket.
10043 This upgrade is not supported for Windows 95. You can upgrade to Windows 98 and run setup again.
10044 Analog Camera Driver Components
10045 Twain Brooktree drivers
10046 Twain UCAM drivers
10047 Setup has determined that the Intel Modem Combo Card will not function correctly in your computer system. Depending on your system configuration, you may be able to use either the PCI or USB version of the Intel Create & Share(tm) Camera Pack. Setup will not continue.
10048 Setup could not find the modem drivers on your computer. The modem has either not been installed or was installed incorrectly. You should exit setup and install your modem. Refer to the installation guide for instructions.
10049 A USB supplement has been installed on your system. Setup must reboot.
10050 Welcome to the %p Setup, which installs the software on your computer.\n
10051 Failed to set Registry key value
10052 USB Camera driver components
10053 Kai's Power GOO & PhotoEnhancer Recovery
10054 Installing %s ...
10055 WDM
10056 You can re-install MetaCreations Kai's Power GOO SE and PictureWorks PhotoEnhancer by selecting Kai's Power GOO & PhotoEnhancer Recovery from the Start menu.
10059 Gallery
10074 Please wait...
10075 Please wait. Setup is setting required registry entries for product installation.
10077 This product requires a minimum of 16 MB of RAM. Your system has only %d MB. Setup cannot continue.
10078 Scene Recorder
10079 Unable to set installation information. Setup cannot continue.
10080 Unable to start logging process to enable Uninstall functionality. Setup cannot continue.
10081 Unable to install %s
10082 Setup did not find Dialer on your system. Your existing Video Phone has been upgraded, but Setup was unable to create a shortcut item for it.
10084 You already have the Intel(R) Create & Share(TM) Camera Pack installed on your system in %s. The version you are now installing is older than the version already on your system. Do you want to overinstall it?
10085 %s application is currently running. Close the %s application and run this Setup again.
10086 Setup is not complete. If you quit the Setup program now, the program will not be installed. \n\n You may run the program at a later time to complete the installation.\n\nDo you want to quit Setup now?
10087 Quick Tour
10088 Visit Intel's Web Site
10089 Not enough memory available to install core components. \n\nPlease close any other running applications, exit Setup, and restart the machine. Then try running Setup again.
10090 Uninstall
10092 Please refer to installation instructions in the user's manual for help.
10093 Intel(R) Business Video Conferencing with ProShare(R) Technology has been found on your computer. It needs to be uninstalled before Intel(R) Create & Share(TM) Camera Pack can be installed.
10094 Checking for Video Capture Device...
10095 Compaq Phone
10096 Video Phone
10097 Unable to set Local video display capture window setting for video phone.
10098 Setup has determined that your computer does not have all of the components required to support the Intel(R) Video Phone Send\Receive upgrade. Please call the support number indicated in the documentation.
10101 Your computer may not meet the minimum system requirements. If you continue the installation, the software may not function properly. Do you want to continue?
10102 Enter Serial Number
10103 Please enter the serial number in the space provided. This number is located on the back of the Intel(R) Create & Share(TM) Camera Pack CD-ROM jacket.
10104 Invalid serial number, please re-enter. The serial number is located on the back of the Intel(R) Create & Share(TM) Camera Pack CD-ROM case.
10105 The Intel(R) Video Capture Card was not found. Make sure the capture card is properly installed. Refer to the installation instructions in the user's manual.
10106 Your system settings indicate that there is another video device that conflicts with the Intel(R) Video Capture Card. If you continue with the installation you may experience problems with any previously installed video applications. Do you wish to continue?
10107 You already have the Intel(R) Create & Share(TM) Camera Pack installed on your system in %s. Are you sure you want to overinstall it?
10108 Setup has detected Intel(R) Internet Video Phone on your computer. It needs to be uninstalled before this installation can continue.\nExit Setup and check the other product's documentation for instructions on uninstalling it.
10109 Setup has determined that your current display settings do not meet the requirements of the Intel(R) Create & Share(TM) Camera Pack. You will have the opportunity to change these settings when you run the program.
10113 Your system settings indicate that there is another video device that conflicts with the Intel(R) Combo Card Video Capture Device. If you continue with the installation you may experience problems with any previously installed video applications. Do you wish to continue?
10114 Read Me
10115 Galleries
10117 Setup needs to install some shared files to drive %s. There is currently only %d MB of disk space available on this drive. Intel(R) Create & Share(TM) Camera Pack needs an additional %d MB of diskspace. Please free up some space on the drive.
10118 Setup has detected that your processor speed is less than 120MHz. This may affect video quality. Do you want to continue?
10121 Video Phone
10122 Video Phone
10123 Intel(R) Video Phone with ProShare(R) Technology Setup is running. Please close all applications and run this setup again.
10124 Some portions of the Intel(R) Create & Share(TM) Camera Pack require the product to be installed to a fixed drive. Please choose a new drive for the installation.
10125 Setup has detected that the configuration of the audio subsystem on your machine may cause your Video Phone's audio to not work when it is used to make a call over telephone lines. Do you want to continue?
10126 Intel Snapshot
10127 Snapshot
10128 You already have the Intel(R) Create & Share(TM) Camera Pack installed on your system in %s. Do you want to upgrade your software?
10135 You already have the Intel(R) Create & Share(TM) Camera Pack installed on your computer in %s. Do you want to update the Camera Pack software to work with your new operating system?
10136 Setup did not find any previous versions of Intel(R) PC Camera software and will not continue.
10137 Please reinstall version 1.x of the Intel(R) Create & Share(TM) Camera Pack and then run this upgrade setup again.
10138 Please reinstall Video Phone Send/Receive Upgrade and then run this upgrade setup again.
10139 Setup did not find previous version of Intel(R) Create & Share(TM) Camera Pack and will not continue.
10140 Wrong CD. You need the Camera version of the upgrade kit. Setup will not continue.
10142 Please reinstall Intel(R) PC Camera software and then run this upgrade setup again.
10143 Installation completed successfully
10144 FreeAction(TM) Sampler
10145 Reality Fusion VarietyPack
10146 The Intel(R) Create & Share(TM) Camera Pack cannot be installed on this version of Windows 95. \n\nTo use the Intel(R) Create & Share(TM) Camera Pack you will need to upgrade your operating system to Windows 98 and then re-install this product.
10147 PC Camera Games
10148 Bounce It
10149 Camera Games Help
10150 Configure Camera Games
10151 Pop the Bubbles
10152 Shoop
10161 Video Phone
10163 Start Camera Pack
10164 Setup has been replacing your Camera Pack files. If you choose to cancel now, your software will not work. Are you sure you want to cancel the overinstall.
10165 You will need to re-install the Create & Share(TM) Camera Pack software before you can use the product again.
10168 You already have a newer version of the Intel(R) Create & Share(TM) Camera Pack installed on your system. You should uninstall the new version first if you want to re-install the old one.
10169 Are you sure you want to completely remove Intel(R) Create & Share(TM) Camera Pack and all of its components?
10170 Please wait while Uninstall prepares to remove the software....
10171 Setup will uninstall your existing Intel(R) Video Phone before installing the latest version.
10172 Setup will restart your computer before continuing with updating your software.
10173 Updating camera drivers...
10174 Please wait while Uninstall removes the Intel(R) Video Phone components....
10175 Please wait while Uninstall removes the Intel(R) Create & Share(TM) Camera Pack components....
10176 The uninstall is complete. In order to remove any files that were locked during the uninstall process, you must restart your computer.\n\nChoose one of the following options and click OK to finish the uninstall.
10177 Setup has detected Compaq VideoPhone on your system. Setup will be installing a new Video Phone to replace your old one. It is recommended that you remove the existing Video Phone before continuing. Do you wish to remove the old phone first?
10178 %s application is currently running. If you wish to uninstall Intel(R) Create & Share(TM) Camera Pack, please close this application and rerun uninstall.
10179 Please go to the Control Panel and select Add/Remove programs. Select the existing Compaq VideoPhone to uninstall it and then run this setup again.
10180 Setup has detected that you already have the Intel(R) Video Phone software. No further installation is required. We recommend the Intel PC Camera for use with your Intel Video Phone software. Visit http://www.intel.com/createshare for more information.
